 |
 |
 |
 |
 |
 |
 |
Latest News
April 2007 Based in the United Kingdom, Aphel Technologies is a global supplier of high density, fault-tolerant power distribution solutions for datacenters, technical offices, laboratories and retail environments. The company has approximately 90 employees. In 2006, Aphel Technologies had sales of $12.3 million. "The acquisition of Aphel Technologies expands our power quality and distribution offerings to customers in key European markets," said Randy Carson, Eaton senior vice president and president - Electrical Group. Eaton Corporation is a diversified industrial manufacturer with 2006 sales of $12.4 billion. Eaton is a global leader in electrical systems and components for power quality, distribution and control; fluid power systems and services for industrial, mobile and aircraft equipment; intelligent truck drivetrain systems for safety and fuel economy; and automotive engine air management systems, powertrain solutions and specialty controls for performance, fuel economy and safety. Eaton has 60,000 employees and sells products to customers in more than 125 countries. For more information, visit www.eaton.com.
November
2006 "The launch of these MT3 models represents a significant advancement over the standard market 30A/208V PDUs " said Kevin Macomber, Vice President of Business Development. "While customers continue to transition to the utilization of 208V for computer hardware, there remains a need to support legacy equipment at 120V. Customers have been obligated to use either three phase power or run two separate circuits to their rackmount enclosure. This new Aphel design eliminates that requirement and more importantly, allows customers to better utilize their pole positions at the panelboard. Coupled with an ammeter that can monitor both outputs and the Neutral, this solution is simply unmatched in the marketplace." MT3 provides total power ranging from 5,000 to 10,000 Watts as well as optional metering or remote monitoring (RS232) capability. Employing the patent pending rPower™ , users can read the high-resolution color display from as far as 12 feet or through the enclosure door perforation. Additionally, rPower™ improves installation flexibility as it can be connected to traditional console port switches. Because of its capability to support so many servers, MT3 greatly simplifies and reduces the cost of rackmount power management. For more information regarding this exciting product launch, please go to http://www.apheltechnologies.com/products/mt3/index.htm or contact Kevin Macomber at (978) 928-1488, kevinmacomber@eaton.com Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. July 2006 As a continuance of one of the largest product portfolios ever released in North America , these MT3 Series models provide unprecedented power in a vertical (0U) design. "The launch of the MT3 Series represents one of the greatest success stories in Aphel's history and probably the North American marketplace" said Kevin Macomber, Vice President of Business Development. "The demand for high density power solutions has required us to push the envelope and develop the first vertical 10kW solutions of their type. Over the coming months, Aphel will continue to exceed the market expectations with both innovative designs and breakthrough technology." MT3 provides total power ranging from 5,000 to 10,000 Watts as well as optional metering or remote monitoring (RS232) capability. Employing the patent pending rPower™ , users can read the high-resolution color display from as far as 12 feet or through the enclosure door perforation. Additionally, rPower™ improves installation flexibility as it can be connected to traditional console port switches. Because of its capability to support so many servers, MT3 greatly simplifies and reduces the cost of rackmount power management. For more information regarding this exciting product launch, please go to http://www.apheltechnologies.com/products/mt3/index.htm or contact Kevin Macomber at (978) 928-1488, kevinmacomber@eaton.comAphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. Apr 2006 Unlike competitive models that use IDC (insulation displacement) receptacles, SL3 employs datacenter grade outlets to support high-power servers. "Today's IT market is quickly requiring power products to support increasing server power consumption." said Kevin Macomber, Vice President of Business Development. "SL3 ensures reliability by using higher quality components consistent with Datacenter design practices. IDC receptacles simply do not meet today's mission critical requirements." SL3 is available from 20 to 30 Amps (at 120V) and is standard with RS232 capability. Employing the patent pending rPower™ , users can read the high-resolution color display from as far as 12 feet or through the enclosure door perforation. Additionally, rPower™ improves installation flexibility as it can be connected to traditional console port switches. Because of its very low profile (only 1.3"), SL3 minimizes the space required by larger power strips. For more information regarding this exciting product launch, please go to http://www.apheltechnologies.com/products/sl/index.htm or contact Kevin Macomber at (978) 928-1488, kevinmacomber@eaton.com Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. Feb 2006 DBH2 represents the first of a number of ultra-dense power solutions Aphel will be delivering to the market this year. "The release of DBH2 provides a sophisticated solution for the next generation of hardware a nd high density enclosures." said Kevin Macomber, Vice President of Business Development. "Its ability to support up to six, 2,900 Watt servers with four power supplies is simply unprecedented." DBH2 provides an amazing 17,200 Watts of power in a compact 2U chassis. Models are available with either twelve C19 or L6-15R (twistlock) outlets to achieve redundancy. Optional satellite power units are available to support smaller servers and ancillary equipment. Employing the Easy-Read™ digital ammeter, users can read the high-resolution color display from as far as 12 feet or through the enclosure door perforation. Because it can support so many large servers, DBH2 reduces the number of plenum cables and simplifies installation . For more information regarding this exciting product launch, please go to http://www.apheltechnologies.com/products/usa.htm or contact Kevin Macomber at (978) 928-1488, kevinmacomber@eaton.com Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. Jan 2006 "Shipments of our first MT3 units represents a significant step forward for Aphel and our customers," said Kevin Macomber, Vice President of Business Development. "Since its development, we have seen huge interest, particularly from our customers who face difficulties powering their high density servers." MT3 provides total power ranging from 5,000 to 8,600 Watts as well as optional metering or remote monitoring (RS232) capability. Employing the patent pending rPower™ , users can read the high-resolution color display from as far as 12 feet or through the enclosure door perforation. Additionally, rPower™ improves installation flexibility as it can be connected to traditional console port switches. Because of its capability to support so many servers, MT3 greatly simplifies and reduces the cost of rackmount power management. Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. Dec 2005 "We are very excited to start shipments of our first rPower units," said Kevin Macomber, Vice President of Business Development. "Since its development, we have seen huge interest in this technology set, particularly from our customers who manage mission critical facilities." Unlike traditional ammeters which require the user to be in close proximity, rPower™ has an impressive high-resolution color display that can be viewed from as far as 12 feet or through the enclosure door perforation. Aside from the ammeter, the device connects to traditional console port switches and can be managed simultaneously with other RS232 based devices. rPower represents a major advancement in power monitoring as it greatly simplifies and reduces the cost of power management. Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world. Nov 2005 The Product Design team, led by Simon Mills, will be responsible for converting our customer’s requirements and evolving market trends into new product designs. Prakash Patel, who will lead the Product Realization team, will drive the design-to-manufacture stages to ensure the fastest and most-cost effective products. Naseer Ahmed, will lead the Continuous Improvement team, whose focus will be on product quality and cost reduction. The entire team will be under the direction of Mike Fulcher. The ECE team of ten Engineers and technicians represents a significant investment and establishes one of the largest PDU Engineering teams in the world. More importantly, it represents our commitment to our customers and our support for their strategic objectives. Combined our Engineers have over 100 years of design experience to support our customer’s broad range of requirements. Aphel is a global supplier of high density, fault-tolerant power solutions for mission critical Datacenters, Technical Office, Laboratory and Retail environments. During 2005, Aphel manufactured 3,000 unique power solutions and is recognized as one of the most flexible power solution manufacturers in the world.
|
||||||||||||||||||
UL
60950
|
 |
I.T.E
P.D.U.
|
E249135
|